Add some vfio setup stuff

setup

@@ -58,6 +58,16 @@ setup_bspwm() {
     fi
 }
 
+setup_bluetooth() {
+    echo "Setting up bluetooth"
+    if [[ "$(cat /etc/os-release)" == *"Ubuntu"* ]]; then
+        echo "TODO: Figure out how to setup bluetooth on Ubuntu"
+    else
+        sudo pacman -S bluez bluez-utils
+    fi
+    sudo systemctl enable --now bluetooth
+}
+
 # Setup paru
 setup_paru() {
     if ! command -v paru &> /dev/null; then
@@ -105,7 +115,7 @@ else
     echo "Updating Arch"
     sudo pacman -Syyu
     echo "Installing tools/utils"
-    sudo pacman -S ripgrep fd neovim make stow tmux dmenu arandr autorandr volumeicon picom nitrogen network-manager-applet lxsession thunar lxappearance-gtk3 power-profiles-daemon acpi arc-icon-theme playerctl xorg-xsetroot ttf-jetbrains-mono-nerd ttf-mononoki-nerd ttf-nerd-fonts-symbols-mono ttf-nerd-fonts-symbols ttf-nerd-fonts-symbols-common starship breeze breeze-gtk breeze-icons pass nushell neofetch man-db python
+    sudo pacman -S ripgrep fd neovim make stow tmux dmenu arandr autorandr volumeicon picom nitrogen network-manager-applet lxsession thunar lxappearance-gtk3 power-profiles-daemon acpi arc-icon-theme playerctl xorg-xsetroot ttf-jetbrains-mono-nerd ttf-mononoki-nerd ttf-nerd-fonts-symbols-mono ttf-nerd-fonts-symbols ttf-nerd-fonts-symbols-common starship breeze breeze-gtk breeze-icons pass nushell neofetch man-db python wget qemu-audio-jack jack-example-tools
 
     sudo systemctl enable --now power-profiles-daemon
 
@@ -116,6 +126,7 @@ else
     setup_hyprland_arch
 fi
 
+setup_bluetooth
 setup_sddm
 
 

setup_arch_kvm

@@ -0,0 +1,15 @@
+#!/bin/bash
+
+echo "Setting up KVM for Arch Linux"
+sudo pacman -S qemu libvirt edk2-ovmf virt-manager ebtables dnsmasq
+
+# Check if IOMMU is supported
+dmesg_iommu_out=$(sudo dmesg | grep -i -e DMAR -e IOMMU)
+if [[ $dmesg_iommu_out ]]; then
+    echo "IOMMU Supported:"
+    echo "$dmesg_iommu_out"
+else
+    echo "IOMMU not supported"
+fi
+
+echo "It's probably a good idea to reboot now..."

setup_asus_libvirt

@@ -0,0 +1,82 @@
+#!/bin/bash
+# This is a simple script to automate the process described by https://asus-linux.org/wiki/vfio-guide/#chapter-3-creating-our-vm
+
+echo "Setting up libvirt hooks"
+sudo mkdir -p /etc/libvirt/hooks/qemu.d && sudo wget 'https://asus-linux.org/files/vfio/libvirt_hooks/qemu' -O /etc/libvirt/hooks/qemu && sudo chmod +x /etc/libvirt/hooks/qemu
+
+echo "Restarting libvirtd"
+sudo systemctl restart libvirtd
+
+echo "Creating libvirt hook dirs for vm: 'win10'"
+sudo mkdir -p /etc/libvirt/hooks/qemu.d/win10/prepare/begin
+sudo mkdir -p /etc/libvirt/hooks/qemu.d/win10/release/end
+
+echo "Creating vm-vars conf file for win10 vm"
+sudo tee /etc/libvirt/hooks/qemu.d/win10/vm-vars.conf <<LIBVIRT_CONFIG > /dev/null
+## Win10 VM Script Parameters
+
+# How much memory we've assigned to the VM, in kibibytes 
+VM_MEMORY=8388608
+
+# Set the governor to use when the VM is on, and which 
+# one we should return to once the VM is shut down
+VM_ON_GOVERNOR=performance
+VM_OFF_GOVERNOR=balanced
+
+# Set the powerprofiles ctl profile to performance when 
+# the VM is on, and power-saver when the VM is shut down
+VM_ON_PWRPROFILE=performance
+VM_OFF_PWRPROFILE=performance
+
+# Set which CPU's to isolate, and your system's total
+# CPU's. For example, an 8-core, 16-thread processor has 
+# 16 CPU's to the system, numbered 0-15. For a 6-core,
+# 12-thread processor, 0-11. The SYS_TOTAL_CPUS variable 
+# should always reflect this.
+#
+# EXAMPLE=0-3,8-11
+# EXAMPLE=0,4,8,12
+# EXAMPLE=0-3,8,11,12-15
+VM_ISOLATED_CPUS=0-12
+SYS_TOTAL_CPUS=0-15
+LIBVIRT_CONFIG
+
+echo "Creating win10 vm libvirt startup hook"
+sudo tee /etc/libvirt/hooks/qemu.d/win10/prepare/begin/10-asusd-vfio.sh <<LIBVIRT_BEGIN_HOOK > /dev/null
+#!/bin/bash
+
+## Load VM variables
+source "/etc/libvirt/hooks/qemu.d/win10/vm-vars.conf"
+
+## Use supergfxctl to set graphics mode to vfio
+echo "Setting graphics mode to VFIO..."
+supergfxctl -m vfio
+
+echo "Graphics mode set!"
+sleep 1
+LIBVIRT_BEGIN_HOOK
+
+
+echo "Creating win10 vm libvirt shutdown hook"
+sudo tee /etc/libvirt/hooks/qemu.d/win10/release/end/40-asusd-integrated.sh <<LIBVIRT_END_HOOK > /dev/null
+#!/bin/bash
+
+## Load VM variables
+source "/etc/libvirt/hooks/qemu.d/win10/vm-vars.conf"
+
+## Use supergfxctl to set graphics mode to vfio
+echo "Resetting graphics mode back to integrated..."
+supergfxctl -m integrated
+
+echo "Graphics mode reset!"
+sleep 1
+LIBVIRT_END_HOOK
+
+echo "Making hook scripts executable"
+sudo chmod +x /etc/libvirt/hooks/qemu.d/win10/prepare/begin/10-asusd-vfio.sh
+sudo chmod +x /etc/libvirt/hooks/qemu.d/win10/release/end/40-asusd-integrated.sh
+
+echo "Adding user '$(whoami)' to libvirt and kvm groups"
+sudo usermod -aG libvirt,kvm $(whoami)
+
+echo "Done! Remember to set graphics mode to vfio in supergfxctl before creating the win10 VM"